|
Find
the bad pixel in the photo. Dead and stuck pixels typically
do not appear in large numbers, although they may slowly multiply
over time. Most of the time, however, it is a single pixel
or a group of few pixels that you can notice in all your photos.
If you are unsure of the location, take a photo of a light
and a dark smooth surface, both with a short exposure time,
to make it more prominent.
In
this example, the faulty group is about 2x2 pixels in size.

Zoom the photo to at least 500-600% (by using the Navigator
panel on the upper right) to make working with this tiny area
easier.
Choose
the Rectangular Marquee Tool from the Tools palette
(or press M). Select the faulty pixel and an area of
at least 1-2 pixels around it. Stuck pixels are often surrounded
by a colored border. Make sure to include it in the selection.
Click Filter/Noise/Dust&Scratches in the menu.
As the name shows, this filter is primarily used to remove
the dust and scratches left on the pictures after scanning
analog photos, but can also be used to remove any disturbing
picture elements. Of course, if you select an area, the filter
will only affect it instead of the whole picture.
On
the appearing dialog, set Radius to a value of 1-3,
and leave Threshold at 0. If you find the effect too
drastic-e.g., if the faulty pixel is not in front of a smooth
background, as in this example, but a more detailed object,
and the filter also removed details inside the selection-,
increase Threshold to refine the result.
As
the faulty pixel appears in the same place in all the photos,
you can automate the procedure by using Photoshop's Action
feature. This way, you can save the steps for removing the
bad pixel and carry them out on all photos.
You
can also process a batch of multiple photos: the application
can run the procedure even on a whole folder of images, and
you'll have no more trouble with the notorious pixel.
If
you are not yet experienced with actions and batch processing,
stay tuned. Soon you can find tips on these topics, too!
|